.

75hp, 4 Cylinder Quality Tractor.

.

This Model Is Also Available With Disk Brakes.

.

Hydrostatic Power Steering With Independent Circuit.

.

Easily Removable Front Grill For Quick Access To Air Cleaner & Battery.

.

Oil Bath With Pre-Cleaner and Semiautomatic Dust Unloaded Air Filter.

.

Forced Feed Lubrication System.

ENGINE POWER

At Flywheel

75 HP

OPERATING WEIGHT

.

2, 070 Kg

ENGINE

New Holland 8045.06

.

4-Stroke, Direct Injection Diesel Engine

.

Number of Cylinder

4

Bore and Stroke

100 x 115 mm

Piston Displacement

3613 cc

Flyweight Type Dynamic Balancer

.

Compression Ratio

17:1

Max. Tarque at 1400 rpm

24.9 kgm

Dry Type Cylinder Liners.

.

Cooling System

Water

Five-Row, Brass Tube and Copper Fin Radiator

.

Forced-Feed Lubrication System

.

Two Power Outlets for Hydraulic Pump on Timing Cover.

.

Distributor Type Injection Pump With Mechanical Speed Governor.

.

Exhaust Muffler

Vertical

Five Bearing Crankshaft

.

FILTERS

Air: Oil-Bath with Pre-Cleaner And Automatic Dust Un-loader

Fuel: 2 Replaceable Cartridges

Oil: Easy-to-Change, Continuous-Flow Cartridge

CLUTCH

Dual Plate, Dry-Type With Separate Control (Pedal For Transmission And Hand Lever For PTO)

.

Diameter Of Plates

11 inches

Plates Facing Of Asbestos Compound

.

FRONT AXLE

Inverted U Section, Telescopic Type

TYRES

Front

7.50-16

Rear

16.9 / 14-30

TRANSMISSION

Gearbox With Constant-Mesh Gears: 8 Forward And 2 Reverse Speeds.

Synchromesh On 3^rd, 4^th, 7^th And 8^th Speeds.

Double Control Lever

Bevel Gear 12/47

Differential Lock With Pedal Actuated And Automatic Disconnection.

Spur Gear Final Drives.

Gear Box Mounted Starter Safety Switch

FENDER

Square Type With Flat Top.

TREADS

Front (8 Positions): 1,320 – 1,420 – 1,520 – 1,620 – 1,720 – 1,820 – 1,920 – 2,020 mm

Rear (8 Positions): 1,320 – 1,420 – 1,520 – 1,620 – 1,720 – 1,820 – 1,920 – 2,020 mm

STEERING

Hydrostatic With Independent Circuit.

.

Minimum Turning Radius:

.

With Brakes

3,400 mm

Without Brakes

3,700 mm

POWER TAKE OFF

6 Spline Shaft – 35 mm dia / 1-3”/8

.

Standard: Fully independent

.

Engine Speed (rpm)

1,967       2,500

PTO Speed (rpm)

540           659

High Speed DTO 35 mm dia / 1-3”/8

.

HYDRAULIC LIFT

With Draft And Position Control

.

Draft Control Through Top Link

.

Gear Type Hydraulic Pump Driven From Engine Crankshaft

.

Pump Capacity (At 2,400 Engine rmp)

24.8 liter / min

Relief Valve Opening Pressure

190 kg / sq.cm

Response Control, 3-Point Linkage Cat I – II Sway Chains

.

Lift Lever Lock Bracket

.

Max. Lifting Capacity

1,650 Kg

DRIVER’S SEAT

Fully Upholstered, With Parallelogram Suspension, Adjustable To Drive’s Weight.

BODY

Hood with side-hinged cover for engine inspection.

Front Grill is easily removable for quick access to air cleaner and battery.

LIGHTING SYSTEM

3-Position Headlights (Parking Low & High Beam).

Rear Parking Lights.

Blue High Beam Warning Light On Instrument Panel And Low Oil Pressure & Battery Charging Light.

Direction Indicators, Parking & Head Lights.

ELECTRICAL SYSTEM

12 Volt Starting Systems, 400 Watt Alternator, 108 Ah Battery.

CAPACITY

Fuel Tank

54 liter

Engine Oil

11.5 liter

Hydraulic Transmission

18 liter

Rear Axle

4 + 4 liter at both sides

Air Cleaner

0.1 liter

Power Steering

1.5 liter

BRAKES

Service Dry Band-Type; Mechanically Operated.

.

Parking

Manual Lever

DIMENSIONS

(With 7.50-16 and 16.9 / 14.30 tyres)

Wheel Base

2,070 mm

Overall Length

3,200 mm

Height to Top of Hood

1,430 mm

Height to Steering Wheel

1,580 mm

Front Tread (8 Positions)

From 1,320 to 2,020 mm

Rear Tread (8 Positions)

From 1,320 to 2,020 mm

Ground Clearance Under Front Axle

520 mm

OPTIONAL EQUIPMENT

Canopy, Towing Hook, Swinging Draw Bar, Cold Starting Aid, Front Weight, High Clearance Kit, Low Clearance Kit, DTO Pump Application and Creeper Gear etc.
 

Note:

Company Reserve The Right To Change Specification Without Prior Notice.